Beschrijving

Hallo,

Ik wil graag een prijsindicatie van de kosten voor laswerk aan een aluminiumboot.

Specificaties:
On forward damage on starboard (C 10) at the level of the bulkhead, insert a plate of 1200 x 200 x 6 mm welded in insert, including internally to the right of the bulkhead after de-panelling. The other scratches on rear (C 8 and C 7) could be reloaded by welding then grinded to the minimum and / or repaired by identical plate, either in the C8 in 600 x 200 x 6 mm and the C7 in 800 x 200 x 6 mm welded. These plates to weld by uncontinuous welding (70 x 200 mm minimum) on the reinforcements e = 400 mm. At C 6.5 and C 5.5 only filler / paint to be redone.
Reload by welding the 6 traces of transversal grinder marks on bottom starboard and portside at C 4.8 (1 x 70 mm), C 5 (1 x 50 mm), C 5.5 (2 x 30 mm), C 6.3 (1 x 30 mm), C 8.2 (1 x 50 mm).
Some traces of electrolytic corrosion attack on the keels in particular to be monitored (-2 to 3 mm) and possibly to recharge by welding after pickling. on forward keel on Portside (To repair by welding of 120 mm).